15 and 2.60%, respectively. The accuracy of recovery test ranged from 94.27 to 107.68% with RSD values 0.15-3.61%. The results of validation showed Fer-1 that the HPLC method was stable and very accurate for the quantification of eight marker components in Ojeok-san.”
“Surface-modified planar-anisotropy Fe50Ni50 particle-resin composites have been studied in the microwave frequency range. After surface modification, the eddy current effect is suppressed effectively while the permeability is almost unchanged. High permeability and appropriate permittivity are obtained at the meantime. Simulated microwave

reflection result shows that the matching thickness, corresponding frequency, mu and epsilon is coincident with the quarter wavelength matching condition. The surface-modified Fe50Ni50/resin composites can be attractive candidates for thinner microwave absorbers in L-band (1-2 GHz). (C)

2010 American Institute of Physics. [doi: 10.1063/1.3524546]“
“Trichodermanin A, a structurally unique diterpenoid with skeletal carbons arranged compactly in a fused 6-5-6-6 ring system, has been isolated from cultures of Trichoderma atroviride (strain no. S361), an endophytic fungus isolate in Cephalotaxus fortunei. The structure of this compound was elucidated based on extensive spectroscopic methods and confirmed by X-ray diffraction analysis.”
“For optimum performance of solar cells featuring a locally contacted rear surface, the metallization fraction as well as the size and distribution of the local contacts are crucial, since Ohmic and recombination losses have to be balanced. S63845 research buy In this work we present a set of equations which enable to calculate this trade off without the need of numerical simulations. Our model combines established analytical and empirical equations to predict the energy conversion efficiency of a locally contacted device. For experimental verification, we fabricate devices from float zone silicon wafers of different resistivity using the laser fired contact technology for forming the local rear contacts. The detailed

selleck compound characterization of test structures enables the determination of important physical parameters, such as the surface recombination velocity at the contacted area and the spreading resistance of the contacts. Our analytical model reproduces the experimental results very well and correctly predicts the optimum contact spacing without the use of free fitting parameters. We use our model to estimate the optimum bulk resistivity for locally contacted devices fabricated from conventional Czochralski-grown silicon material. These calculations use literature values for the stable minority carrier lifetime to account for the bulk recombination caused by the formation of boron-oxygen complexes under carrier injection. (C) 2010 American Institute of Physics. [doi:10.1063/1.